Undock button settings, Shut down. for more information, see – Dell Alienware 13 (Late 2014) User Manual
Page 33
Undock Button Settings
This section will provide procedure on how to set the computer’s behavior
when the undock button on the graphics cable is pressed.
1
Launch
AlienAdrenaline.
Windows 8.1:
a) On the
Start screen, browse to Apps and click the Alienware
Command Center tile.
b) In the Alienware Command Center window, click
AlienAdrenaline.
Windows 7:
Click
Start → All Programs → Alienware → Command Center →
AlienAdrenaline.
2 On the AlienAdrenaline window, click Graphics Amplifier → Undock
Button.
NOTE: Save and close all open files and exit all open applications
before pressing the undock button on the graphics cable.
3 Use the following options to configure the computer’s behavior when the
undock button on the graphics cable is pressed:
–
Always Prompt Options - A message box appears asking you to
either restart or shutdown the computer.
–
Restart - The computer restarts.
–
Shutdown - The computer is shutdown.
33