Dell Alienware 13 (Late 2014) - Manual (Page 6)

CAUTION: To avoid damaging the components and cards,
handle them by their edges and avoid touching pins and
contacts.
CAUTION: Only a certified service technician is authorized to
remove the device cover and access any of the components
inside the device. See the safety instructions for complete
information about safety precautions, working inside your
device, and protecting against electrostatic discharge.
CAUTION: Before touching anything inside your device,
ground yourself by touching an unpainted metal surface,
such as the metal at the back of the device. While you work,
periodically touch an unpainted metal surface to dissipate
static electricity, which could harm internal components.
CAUTION: When you disconnect a cable, pull on its connector
or on its pull-tab, not on the cable itself. Some cables have
connectors with locking tabs or thumb-screws that you
must disengage before disconnecting the cable. When
disconnecting cables, keep them evenly aligned to avoid
bending any connector pins. When connecting cables, make
sure that the ports and connectors are correctly oriented
and aligned.
CAUTION: To disconnect a network cable, first unplug the
cable from your device and then unplug the cable from the
network device.
Recommended Tools
The procedures in this document may require the following tools:
• Philips screwdriver
6