Recommended memory configuration, Setting up dual channel memory configuration – Dell Inspiron 545s (Early 2009) User Manual

Page 31

Advertising
background image

 

 

5.

Insert the memory module into the connector until the memory module snaps into position.

If you insert the memory module correctly, the securing clips snap into the cutouts at each end of the memory module.

 

6.

Replace the computer cover (see

Replacing the Computer Cover

).


 

7.

Connect your computer and devices to electrical outlets, and then turn them on.

If the message appears stating that memory size has changed, press <F1> to continue.

 

8.

Log on to your computer.

 

9.

Right-click the My Computer icon on your Microsoft

® 

Windows

®

desktop and click Properties.


 

10.

Click the General tab.

 

11.

To verify that the memory is installed correctly, check the amount of memory (RAM) listed.

 

Recommended Memory Configuration

While installing or replacing memory, refer to the table below:

 

Setting Up Dual Channel Memory Configuration

Inspiron 545s

3

notch

4

memory module

CAUTION:

To avoid damage to the memory module, press the memory module straight down into the connector while you apply equal force to

each end of the memory module.

1

cutouts (2)

2

securing clip (snapped in position)

Model

One module Two modules Three modules Four modules

535s/537s DIMM1

DIMM1
DIMM2

NA

NA

545s

DIMM1

DIMM1
DIMM3

DIMM1
DIMM3
DIMM2

DIMM1
DIMM3
DIMM2
DIMM4

546s

DIMM1

DIMM1
DIMM2

DIMM1
DIMM2
DIMM3

DIMM1
DIMM2
DIMM3
DIMM4

NOTE:

Dual channel memory is not supported on Inspiron™ 535s/537s.

Advertising