Replacing the thermal cooling assembly – Dell Inspiron 14 (N4050, Mid 2011) User Manual
Page 50
Advertising
50
Thermal Cooling Assembly
Replacing the Thermal Cooling Assembly
1 Follow the instructions in "Before You Begin" on page 9.
2 Align the four captive screws on the thermal cooling assembly with the
screw holes on the system board and tighten the screws in sequential order
(indicated on the thermal cooling assembly).
3 Connect the fan cable to the connector on the system board.
4 Follow the instructions from step 3 to step 7 in "Replacing the Palm-Rest
5 Replace the battery. See "Replacing the Battery" on page 14.
CAUTION:
Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
1
thermal cooling assembly
2
fan cable
3
captive screws (4)
1
2
3
Advertising