Dell Inspiron 14 (N4050, Mid 2011) - Manual (Page 70)

70 Camera Module
Replacing the Camera Module
1 Follow the instructions in "Before You Begin" on page 9.
2 Connect the camera cable to the connector on the camera module.
3 Use the alignment posts on the display cover to place the camera module
in position and snap the camera module into place.
4 Replace the display bezel. See "Replacing the Display Bezel" on page 63.
5 Replace the display assembly. See "Replacing the Display Assembly" on
page 61.
6 Replace the hinge cover. See "Replacing the Hinge Cover" on page 57.
7 Replace the USB board. See "Replacing the USB Board" on page 48.
1 camera module 2 camera cable
3 tabs (2)
1
2
3