Dell PowerEdge T710 - Manual (Page 86)

86
Installing System Components
Figure 3-4. Opening and Closing the System
Closing the System
1 Ensure that all internal cables are connected and folded out of the way.
2 Ensure that no tools or extra parts are left inside the system.
3 Align the cover with the slots in chassis and lower the cover into the
chassis. See Figure 3-4.
4 Press the cover into the chassis until the latch locks into place.
5 Turn the lock on the cover release latch clockwise to the locked position.
See Figure 3-4.
6 Place the system upright and on its feet on a flat, stable surface.
7 Rotate the system feet outward.
1 cover release latch 2 cover release latch lock
3 system cover 4 system feet (4)
4
3
1
2
book.book Page 86 Monday, June 15, 2009 11:33 AM