Installing the input/output panel – Dell OptiPlex 990 (Early 2011) User Manual
Page 48
Advertising
7.
Remove the Input/Output panel.
Installing The Input/Output Panel
1.
Insert the Input/Output panel into the slot on the chassis front.
2.
Slide the Input/Output panel towards the left of the computer to secure to the
chassis.
3.
Tighten the screw to secure the Input/Output panel to the chassis.
4.
Connect the Input/Output panel or the FlyWire cable to the system board.
5.
Install the
6.
Install the
7.
Follow the procedures in
After Working Inside Your Computer
48
Advertising