Alert! security override jumper is installed, Attachment failed to respond, Bad command or file name – Dell OptiPlex 990 (Early 2011) User Manual
Page 84: Bad error-correction code (ecc) on disk read, Controller has failed, Data error
Alert! Security override Jumper is installed.
Description The MFG_MODE jumper has been set and AMT Management features are
disabled until it is removed.
Attachment failed to respond
Description The floppy or hard drive controller cannot send data to the associated
drive.
Bad command or file name
Description Ensure that you have spelled the command correctly, put spaces in the
proper place, and used the correct pathname.
Bad error-correction code (ECC) on disk read
Description The floppy or hard drive controller detected an uncorrectable read error.
Controller has failed
Description
The hard drive or the associated controller is defective.
Data error
Description The floppy or hard drive cannot read the data. For the Windows operating
system, run the chkdsk utility to check the file structure of the floppy or
hard drive. For any other operating system, run the appropriate
corresponding utility.
84