Dell Inspiron 14z (1470, Mid 2009) - Manual (Page 47)

Display 47
15 Lift the display assembly off the computer base.
Replacing the Display Assembly
1 Follow the instructions in "Before You Begin" on page 9.
2 Place the display assembly in position and replace the two screws that
secure the display assembly to the computer base.
NOTE: Ensure that no cables are caught between the display assembly and
the computer base.
3 Route the display, camera, and mini-card antenna cables through their
routing guides.
1 screws (2) 2 display assembly
3 mini-card antenna cables 4 camera-cable connector
5 display-cable connector
2
1
5
4
3