Replacing the dc-in connector assembly – Dell Inspiron 14z (1470, Mid 2009) User Manual
Page 58
Advertising
58
DC-in Connector Assembly
10 Disconnect the DC-in connector cable from the connector on the system
board.
11 Lift the DC-in connector off the computer base.
Replacing the DC-in Connector Assembly
1 Follow the instructions in "Before You Begin" on page 9.
2 Place the DC-in connector on the computer base.
3 Connect the DC-in connector cable to the connector on the system board.
4 Replace the screw that secures the DC-in connector assembly.
5 Replace the hinge cover. See "Replacing the Hinge Cover" on page 49.
6 Replace the display assembly. See "Replacing the Display Assembly" on
7 Replace the palm-rest assembly. See "Replacing the Palm-Rest Assembly"
8 Replace the keyboard. See "Replacing the Keyboard" on page 33.
1
screw
2
DC-in cable connector
2
1
Advertising