Dell PowerEdge 500SC - Manual (Page 30)

IRQ
Abbreviation for interrupt request. A signal that data is about to be sent to or received by a peripheral device travels by an IRQ line to the microprocessor.
Each peripheral connection must be assigned an IRQ number. For example, the first serial port in your system (COM1) is assigned to IRQ4 by default. Two
devices can share the same IRQ assignment, but you cannot operate both devices simultaneously.
ISA
Acronym for Industry-Standard Architecture. A 16-bit expansion bus design. The expansion-card connectors in an ISA system are also compatible with 8-bit ISA
expansion cards.
ITE
Abbreviation for information technology equipment.
jumper
Jumpers are small blocks on a circuit board with two or more pins emerging from them. Plastic plugs containing a wire fit down over the pins. The wire connects
the pins and creates a circuit. Jumpers provide a simple and reversible method of changing the circuitry in a printed circuit board.
K
Abbreviation for kilo-, indicating 1,000.
KB
Abbreviation for kilobyte(s), 1,024 bytes.
KB/sec
Abbreviation for kilobyte(s) per second.
Kbit(s)
Abbreviation for kilobit(s), 1,024 bits.
Kbit(s)/sec
Abbreviation for kilobit(s) per second.
key combination
A command requiring you to press multiple keys at the same time. For example, you can reboot your system by pressing the <Ctrl><Alt><Del> key
combination.
kg
Abbreviation for kilogram(s), 1,000 grams.
kHz
Abbreviation for kilohertz, 1,000 hertz.
LAN
Acronym for local area network. A LAN system is usually confined to the same building or a few nearby buildings, with all equipment linked by wiring dedicated
specifically to the LAN.
lb
Abbreviation for pound(s).
LED
Abbreviation for light-emitting diode. An electronic device that lights up when a current is passed through it.
local bus
On a system with local-bus expansion capability, certain peripheral devices (such as the video adapter circuitry) can be designed to run much faster than they
would with a traditional expansion bus. Some local-bus designs allow peripherals to run at the same speed and with the same width data path as the
system's microprocessor.
LPTn
The device names for the first through third parallel printer ports on your system are LPT1, LPT2, and LPT3.
m
Abbreviation for meter(s).
mA