Cd/dvd drive, Removing a cd/dvd drive – Dell Dimension 3000 User Manual
Page 20
10.
Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
11.
Enter system setup
and update the appropriate Diskette Drive option.
12.
Verify that your computer works correctly by running the Dell Diagnostics.
CD/DVD Drive
1.
Follow the procedures in
Before You Begin
.
2.
Remove the computer cover
.
3.
Removing a CD/DVD Drive
1.
Disconnect the power, audio, and CD/DVD drive cables from the back of the drive and from the system board.
2.
Remove the CD/DVD drive securing screw.
3.
Slide the drive forward and remove it from the drive bay.
NOTICE:
To connect a network cable, first plug the cable in to the network wall jack and then plug it in to the computer.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.