Dell PowerVault LTO3-060 - Manual (Page 40)

Note: Some backup applications issue a command to the drive that prevents the Eject button from ejecting the
tape. If the tape does not eject, try using the commands in your backup software.
Figure 3: Location of the eject button
Write Protecting the Cartridge
The LTO cartridge can be write-protected by moving the tab as indicated in the figure below.
Figure 4: LTO cartridge write protect switch
A = Tape Window. The window is spring loaded and closed when the cartridge is not inserted.
B = Write Protect Switch. The picture shows the switch in the non-protected position. When it is write protected, the
switch is to the right and the area is red.
Handling and Storing LTO Cartridges
To improve data reliability and cartridge lifetime, it is important to handle and store the cartridges properly.
Do not drop the cartridges.
Ensure that the cartridges are stored in a clean environment away from dirt, dust, or moisture.
It is recommended to store cartridges in their protective case.
Do not expose the cartridge to direct sunlight or excessive heat sources.
Do not touch the tape media inside a cartridge.
Prior to use, the LTO cartridge should be adapted to the operating environment for a time at least equal to the
period it has been out of the operating environment outside and above 10ºC – 35ºC (up to a maximum of 24
hours). Recommended operating temperature is 25ºC or below (see tape drive specifications).
Replace worn or excessively noisy LTO cartridges.
Store the LTO cartridge in a cool and dry environment. Avoid high temperatures. Recommended maximum
temperature is 25ºC/77ºF and 50 % RH humidity.
Do not store the LTO cartridge near devices such as computer monitors, TV sets, or loudspeakers with strong
magnetic fields (not exceeding 4000/A/m).
Cleaning the Tape Drive
A standard LTO type cleaning cartridge is included with your tape drive. Before use, the cleaning cartridge should be