Compaq TFT5015s - Manual (Page 17)

Compaq TFT5015 User’s Guide 15
5. Access the third level by selecting a function and pressing the
Menu button. Adjust the third level menu displays using the
same procedures as the second level.
6. To exit from the on-screen menu, select Exit from the
Advanced Main Menu. If the display is a second or
third-level menu, select Save and Return or Cancel, then
select Exit from the Advanced Main Menu.
The on-screen display is easy to use, just follow the instructions
on the screen.
Special OSD Messages
Special OSD messages will appear on the monitor screen when
identifying the following monitor conditions:
■ Input Signal Out of Range: Indicates the monitor is unable to
access or fully support the provided input signal.
■ Going to Sleep: Indicates the screen display is entering a
sleep mode.
■ Check Video Cable: Indicates the video cable may not be
plugged into the computer or the computer may not be turned
on.
■ OSD Lock: The OSD can be enable or disabled by pressing
and hold the Menu button on the front panel for 10 seconds.
If the OSD is disabled, the warning message “OSD Lock” is
displayed for five seconds.
Sleep Timer Mode
The Sleep Timer mode is an energy saving feature that enables
you to set a time for the monitor to power on and off at the same
time every day. This also extends the life of the backlight bulbs in
the monitor. The Sleep Timer has five settings:
■ Set Current Time
■ Set Sleep Time