Compaq TFT5015s - Manual (Page 5)

Compaq TFT5015 User’s Guide 3
Setting Up the Monitor
To set up the monitor, ensure that the power is turned off to the
monitor, computer system, and other attached devices, then
follow these steps:
1. Place the monitor in a convenient, well-ventilated location
near your computer.
2. Connect the VGA monitor signal cable (1) to the VGA
connector on the rear panel of the computer.
3. Connect one end of the AC power cord (2) to the monitor and
the other end to an electrical outlet that is easily accessible
and close to the monitor.