Dell Dimension 4300 - Manual (Page 63)

Adding Parts 63
FILE LOCATION: FILE LOCATION: FILE LOCATION: FILE LOCATION: C:\Projects\Green_Lantern_solutions\2H930c31.fm
D E L L C O N F I D E N T I A L – P R E L I M I N A RY 1 1 / 2 0 / 0 1 D E L L C O N F I D E N T I A L – P R E L I M I N A RY 1 1 / 2 0 / 0 1 D E L L C O N F I D E N T I A L – P R E L I M I N A RY 1 1 / 2 0 / 0 1 D E L L C O N F I D E N T I A L – P R E L I M I N A RY 1 1 / 2 0 / 0 1
Reattaching the Hinge Arms
CAUTION: Before you begin any of the procedures in this section,
follow the safety instructions listed in "When Working Inside Your
Computer" on page 12.
1 Shut down the computer (see page 20).
2 Disconnect the power cable from your computer.
3 Remove the front door, if it is attached.
The front door snaps off of the two hinge arms.
4 Remove the front-panel insert above the front-door bay area.
Pull the bottom of the insert with your fingers to remove it.
front-panel
insert
use fingers
to pull here
2H930bk1.book Page 63 Tuesday, November 20, 2001 5:02 PM