Dell OptiPlex 980 (Early 2010) - Manual (Page 34)

Under Automated Setup and Configuration, select Provisioning Record and press Enter.
Provisioning Record – Displays the system’s provision PSK/PKI record data. If the data has not been entered, the Intel
MEBx displays a message stating “Provision Record not present”.
If the data is entered, the Provision record will display as below:
Option Description
TLS
provisioning
mode
Displays the current configuration mode of the system: None, PSK or PKI.
Provisioning IP The IP address of the setup and configuration server.
Date of
Provision
Displays the date and time of the provisioning in the format MM/DD/YYYY at HH:MM.
DNS
Indicates whether the "PKI DNS Suffix" was configured in Intel MEBx before remote
configuration took place or not. A value of 0 indicates that the DNS suffix was not
configured and the firmware will rely on DHCP option 15 and compare this suffix to the
FQDN in the Configuration Server's client certificate. A value of 1 indicates that the DNS
suffix was configured and the firmware matched it against the DNS suffix in the
Configuration Server's client certificate.
Host Initiated – Indicates whether the setup and configuration process was initiated by the
host: ‘No’ indicates that the setup and configuration process was NOT host-initiated, ‘Yes’
indicates the setup and configuration process was host-initiated (PKI only).
Hash Data Displays the 40-character certificate hash data (PKI only).
Hash Algorithm Describes the hash type. Currently, only SHA1 is supported. (PKI only).
IsDefault
Displays ‘Yes’ if the hash algorithm is the default algorithm selected. Displays ‘No’ if the
hash algorithm is NOT the default algorithm used (PKI only).
FQDN FQDN of the provisioning server mentioned in the certificate (PKI only).
Serial Number The 32-character string that indicates the Certificate Authority serial numbers.
Time Validity
Pass
Indicates whether the certificate passed the time validity check.
RCFG