Dell OptiPlex 980 (Early 2010) - Manual (Page 62)

Activate Network Access Y / N
Unconfigure Network Access Y / N
Remote Setup and Configuration
Current Provisioning Mode
Provisioning Record
RCFG
Start Configuration Y / N
Provisioning Server IPv4/IPv6 blank
Provisioning Server FQDN blank
TLS PSK
Set PID and PPS blank
Delete PID and PPS Y / N
TLS PKI
Remote Configuration
Disabled
Enabled *
PKI DNS Suffix blank
Manage Hashes
FW Update Settings
FW Update Settings
Local FW Update Qualifier
Always Open *
Never Open
Restricted
Secure FW Update
Disabled
Enabled *
*Default setting
**May cause Intel AMT partial unprovision
1 Intel ME Platform State Control is only changed for Management Engine (ME) troubleshooting.
2
Un-provision setting only seen if the box is provisioned.