Dell Latitude D505 - Manual (Page 38)

Display Latch
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed
batteries.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an
unpainted metal surface on the computer.
1. Remove the keyboard .
2. Remove the display assembly .
3. Remove the display bezel .
4. Remove the M2 x 5-mm screw that secures the display bracket to the top cover.
5. Lift the display bracket out of the top cover, and then remove the display latch.
NOTE: Ensure that the display bracket is upright when you replace the display latch.
1 top cover H1375
2 M2 x 5-mm screw (1) 1428U
3 display bracket
4 display latch F1484
Back to Contents Page