Dell Latitude D505 - Manual (Page 39)

Back to Contents Page
Palm Rest
Dell™ Latitude™ D505 Service Manual
CAUTION: Before performing the following procedures, read the safety instructions in your Product
Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching
an unpainted metal surface (such as the back panel) on the computer.
1. Follow the instructions in " Preparing to Work Inside the Computer ."
2. Remove the keyboard .
NOTICE: You must remove the display assembly before you remove the palm rest; the display hinges pass through
the back of the palm rest.
3. Remove the display assembly .
4. Remove the three M2.5 x 5-mm screws labeled "circle P" from the top of the palm rest.
5. Remove the M2.5 x 5-mm screw labeled "M2.5x5" from the metal shield.
1 M2.5 x 5-mm screws labeled "circle P" (3) 63PDH
2 top of the palm rest
3 M2.5 x 5-mm screw labeled "M2.5x5" 63PDH
6. Turn over the computer and remove the 13 M2.5 x 8-mm screws.