Dell Inspiron 1150 - Manual (Page 72)

72
Adding and Replacing Parts
www
.dell.com | support.dell.com
Replacing the Modem
1 Remove the existing modem:
a Remove the screws securing the modem to the system board, and set them aside.
b Pull straight up on the attached pull-tab to lift the modem out of its connector on the
system board and disconnect the modem cable.
2 Connect the modem cable to the modem.
NOTICE:
The cable connectors are keyed for correct insertion; do not force the connections.
3 Align the modem with the screw holes, and press the modem into the connector on the
system board.
4 Install the screws to secure the modem to the system board.
5 Replace the cover.
Adding a Mini PCI Card
CAUTION:
FCC rules strictly prohibit users from installing 5 GHz (802.11a, 802.11a/b, 802.11a/b/g)
Wireless LAN Mini PCI cards. Under no circumstances should the user install such a device. Only
trained Dell service personnel are authorized to install a 5 GHz Wireless LAN Mini PCI card.
If you are removing and/or installing a 2.4 GHz (802.11b, 802.11b/g) Mini PCI Card, please follow the
instructions noted below. Only products approved for use in your portable computer may be installed.
Approved Mini PCI Cards may be purchased only from Dell.
NOTE:
2.4 GHz Wireless LAN PC Cards may be removed and installed by the user.
modem cable connector
modem cable
pull-tab
screws (2)