Dell Inspiron 1150 - Manual (Page 76)

76
Adding and Replacing Parts
www
.dell.com | support.dell.com
4 Press the lever next to the memory module connectors in the direction of the arrow on the
lever (towards the drive) to release the drive.
5 Pull the drive out of the bay.
6 Slide the new drive into the bay until the drive is fully seated.
7 Replace the screw that you removed in step 3.
8 Replace the memory module cover and screw.
Keyboard
1 Complete the instructions in "Before You Begin" on page 65.
2 Use a small flat-blade screwdriver or plastic scribe to lift the notched right edge of the hinge
cover, and pry the cover loose from the hinges and bottom case.
3 Lift the hinge cover up and away from the hinges and bottom case.
4 Remove the four keyboard screws.
NOTICE:
The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace.
Be careful when removing and handling the keyboard.
5 Lift the keyboard out of the bottom case, and rest it on the display hinges so that the
keyboard connector is exposed.
hinge cover