Replacing the palm rest, Procedure, Post-requisites – Dell Inspiron 15 (3541, Mid 2014) User Manual

Page 41

Advertising
background image

Replacing the Palm Rest

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in

Before Working Inside Your Computer

. After working inside your

computer, follow the instructions in

After Working Inside Your

Computer

. For more safety best practices, see the Regulatory

Compliance home page at dell.com/regulatory_compliance.

Procedure

1

Follow the procedure from step 1 to step 4 in “Replacing the

Touchpad

”.

2 Follow the procedure from step 1 to step 7 in “Replacing the

Power-

Button Module

”.

3 Slide the slots on the palm rest into the ports on the system board and

place the palm rest on the computer base.

4 Press down on the palm rest to snap it into place.
5 Replace the screws that secure the palm rest to the computer base.
6 Slide the touchpad cable and the power-button board cable into the

system-board connectors and press down on the connector latches to

secure the cables.

7

Close the display and turn the computer over.

8 Replace the screws that secure the palm rest to the computer base.
9 Turn the computer over and open the display as far as possible.

Post-requisites

1

Replace the

keyboard

.

2 Follow the procedure from step 4 to step 6 in “Replacing the

Hard Drive

”.

3 Replace the

base cover

.

4 Replace the

battery

.

41

Advertising