Dell Precision 350 - Manual (Page 26)

26 S e t u p a n d Q u i c k Re f e r e n c e G u i d e
www
.dell.com | support.dell.com
If a computer problem occurs that you are unable to resolve through the
steps in this section or the procedures in "Finding Solutions" in your
User’s
Guide, complete the following steps before you contact Dell:
1 Write a detailed description of the error, beep code, or diagnostic light
problem.
2 Record your Express Service Code and Service Tag Number.
3 Contact Dell from the same location as your computer.
Frequently Asked Questions
A possible USB failure has
occurred. Resinstall all USB devices, check cable connections, and
then restart the computer.
The computer is in a
normal operating
condition after POST. None.
Light Pattern Problem Description Suggested Resolution
YGGG
GGGG
How Do I... Solution Where to Find Additional
Information
Set up my computer to use two
monitors? If your computer has the required
graphics card to support dual-
monitor setup, then look in your
box for a Y-cable. The cable has a
single connector on one end (plug
this connector into the back panel)
and branches into two connectors
(plug these connectors into the
monitor cables). See "Connecting
Dual Monitors" on page 12.