Cisco 1700 - Manual (Page 10)

x
Cisco 1700 Router Hardware Installation Guide
78-5405-03
Organization
This guide is organized as follows:
• The chapter “Cisco 1700 Router Overview” describes the router features and
describes the front-panel LEDs, rear-panel LEDs, and connectors.
• The chapter “Installing the Cisco 1700 Router” describes how to install the
router by connecting cables, power, and installing WAN interface cards.
• The chapter “Troubleshooting” describes some problems that you might have
with the router and how to solve these problems.
• The appendix “Technical Specifications” lists the physical characteristics,
environmental requirements, and power specifications for the router.
• The appendix “Cabling Specifications” lists the physical characteristics of
the cables and connectors used with the router.
• The appendix “Installing and Upgrading Router Memory” describes how to
ugrade existing memory or install new memory in your router.
• The appendix “Ordering and Configuring an ISDN Line” describes how to
order and configure ISDN line so that it will operate with your Cisco 1700
router.
Related Publications
The following publications provide related information on this product:
• Installing Your Cisco 1700 Router is the quick-start guide that came with
your router. It has instructions for quickly cabling the router, installing WAN
interface cards, and powering up the router.
• Cisco 1700 Router Software Configuration Guide describes some common
network scenarios and how to use the Cisco IOS command-line interface
(CLI) to configure the router in these scenarios.
• Cisco WAN Interface Cards Hardware Installation Guide describes how to
install and configure all the WAN interface cards that are supported by the
Cisco 1700 router.