Vermont Casting VC3624GS - Manual (Page 7)

Hardware:
Tools needed:
Assembly Step 2
Locate these parts:
Phillips Head
Screwdriver
HARDWARE BAG
A
Leg with
hole
1. Turn the
2. For each leg, line up the holes and
insert the bolts. Nuts are pre-welded
to the cabinet.
yet insert the two front
bolts indicated by the red arrows.
They will be used in the next
assembly step.
3. Securely tighten the bolts.
extra hole on its side must be
mounted at the front in the position
shown. This hole will be used later
to secure the gas hose to the leg
with a zip-tie.
cabinet
upside
down.
The leg that contains
an
DO NOT
IMPORTANT:
5
1/4-20 x 5/8” Bolts
16 Required
4 Legs
Cabinet
Assembly
FRONT