Vermont Casting VC3624GS - Manual (Page 8)

Hardware:
Tools needed:
Assembly Step 3
Locate these parts:
Phillips Head
Screwdriver
1. Leave the cabinet
upside down.
2. From the front side, position
the control panel upside down
between the front legs as shown.
3. Set the control panel between the
front legs and line up the mounting
holes. Be sure the mounting tabs
on the back side of the control
panel capture the legs as shown.
4. Insert the 2 remaining bolts and
tighten them securely.
6
1/4-20 x 5/8” Bolts
(2 remaining from previous step)
FR
ONT
FRONT
Mounting
Tab
Control
Panel
HARDWARE BAG
A