Canon ImageCLASS MF4570DN - Manual (Page 102)

6-18
U
sing the F
ax F
unc
tions
The default values for fax are those functions which are
applied automatically when [
] (Reset) is pressed or the
power is turned ON. You can change the default values to suit
your needs.
You can register the following types of settings as the default
values.
• Resolution
• Density
• Sharpness
Keys to be used for this operation
Menu
OK
1
Press [ ] (Menu).
2
Press [ ] or [ ] to select <Fax TX Settings>, and
then press [OK].
Menu
Preferences
Timer Settings
Copy Settings
Fax TX Settings
3
Press [ ] or [ ] to select <TX Function Settings>,
and then press [OK].
Fax TX Settings
Basic Settings
TX Function Settings
Fax Setup Guide
4
Press [ ] or [ ] to select <Change Defaults>, and
then press [OK].
TX Function Settings
Change Defaults
ECM TX
Pause Time
Auto Redial
5
Press [ ] or [ ] to select a setting item, and then
press [OK].
- Resolution/Density/Sharpness
For details on settings, see “Fax Settings” (P.6-3).
Change Defaults
<Apply>
Resolution: 200 x 100
Density: 0
Sharpness: 0 +
-
+
-
6
After specifying the setting, press [ ] or [ ] to
select <Apply>, and then press [OK].
Change Defaults
<Apply>
Resolution: 200 x 10 ...
Density: 0
Sharpness: 0 +
-
+
-
7
Press [ ] (Menu) to close the menu
screen.
Changing the Default Values for Fax