Canon ImageCLASS MF4570DN - Manual (Page 30)

1-6
Bef
or
e U
sing the M
achine
LCD (Standby Mode)
This section describes the following screens.
• Copy Mode
• Fax Mode
• Scan Mode
NOTE
Display of the standby mode
• You can change the standby display which appears when the
power switch is turned ON.
e-Manual Basic Operation Customizing Display
Settings Setting the Default Screen
• When the machine is idle for 2 minutes, the display returns to
standby mode.
e-Manual Basic Operation Customizing Timer Settings
Specifying the Auto Reset Timer
Copy Mode
When using the copy function, press [ ] to switch
to the standby display.
Copy: Press Start
100% LTR
Density: 0
Original Type: Text
...
2-Sided: Off
1
+
-
01
When the copy mode screen is displayed, you can select
items by pressing [
] or [ ].
The currently selected item will be highlighted with a black
background, and pressing [OK] will advance to the next
screen.
Copy: Press Start
100% LTR
Density: 0
Original Type: Text ...
2-Sided: Off
1
+
-
01
Fax Mode
When using the fax function, press [ ] to switch to
the standby display.
Specify destination.
01/01/2011 12:52AM
RX Mode: Auto
Resolution: 200 x 1
...
When the fax mode screen is displayed, you can select
items by pressing [
] or [ ].
The currently selected item will be highlighted with a black
background, and pressing [OK] will advance to the next
screen.
Specify destination.
01/01/2011 12:52AM
RX Mode: Auto
Resolution: 200 x 1 ...
Scan Mode
When using the scan function, press [ ] to switch
to the standby display.
When the scan mode screen is displayed, you can select
items by pressing [
] or [ ].
The currently selected item will be highlighted with a black
background, and pressing [OK] will advance to the next
screen.
Select the scan type.
Computer
Remote Scanner