Pro-Ject Audio Systems Set Mediaplayer - Manual (Page 5)

© Audio Trade GmbH · Pro-Ject Set Mediaplayer · Revision 2013.1.15
5
Front panel controls - Media Box S
Media Box S
To switch on from standby or to standby - Media Box S
The push button on the left hand side will toggle the player between its fully operational status and standby.
The blue LED above the stand-by push button shows that the unit is switched on. The display shows STANDBY
when the unit is in standby.
If there is no SD card inserted, or no USB-device connected, the unit will returns to standby automatically.
After switching to standby, the display shows the current software version.
Navigating the menu and playlists, main menu
and moves the curser up and down, to highlight the requested option in menus and playlists.
displays the main menu and starts playback of a selected track in a playlist.
Play / Pause
Pressing starts and pauses playback. Restarts playback from the same position after stopping.
displays the playlist. starts playback of a selected track in a playlist. Starts playback of the next track.
Remote control - Media Box S
POWER USB/SD
ENTER
7 9
0
REPEAT
8
7 9
+ FOL
_
FOL
+ 5 5
_
To switch on from standby or to standby
POWER
turns the unit on or back into standby
Input selection
USB/SD
selects between card reader and USB
Navigating the menu, playlist, main menu
and move the curser up and down, to highlight the requested
option.
displays the playlist
ENTER
displays the main menu. Selects the highlighted option, or modes in
menus and submenus.