Pro-Ject Audio Systems Set Mediaplayer User Manual
Page 7
© Audio Trade GmbH · Pro-Ject Set Mediaplayer · Revision 2013.1.15
7
Replacing batteries
Proceed as follows:
Unlock and slide open the battery case cover
Replace the battery.
Make sure the battery is the right way round !
Close the battery case cover
Battery type: 1 x CR2032 / 3V or 1 x CR2025 / 3V
Do not dispose the batteries as ordinary domestic refuse. Please dispose your exhausted batteries at
the appropriate collection sites - usually located at supermarkets and drugstores.
Technical specifications Pro-Ject Stereo Box S
Power output:
2 x 25W/30W at 8 ohms/4 ohms (both channels driven)
Frequency response:
20Hz - 20kHz (±0,2dB)
Channel separation:
>40dB at 20kHz
Noise floor:
>-100dB (A weighted)
THD:
<0,05% at 10W
Gain: 22dB
Line-level inputs:
2 pairs RCA/phono sockets
Input impedance:
20kohms
Record Out:
3-pole 3,5mm co-axial jack
Speaker connectors:
4mm banana plugs, spades connectors or naked wire
Outboard power supply:
20V/3A DC (peak 7A DC), suitable for your country's mains supply
Power consumption:
3A DC, <1W in standby
Replacement battery remote control: 1 x CR2032 / 3V
Dimensions W x H x D (D with sockets): 103 x 36 x 104 (122)mm
Weight:
720g without power supply
Technical specifications Pro-Ject Media Box S
Audio formats:
MP3, WMA, AAC (no DRM support)
USB-input:
High-Speed 2.0, 24/96. Typ A-socket.
Power supply for 2,5” hard drives (5V DC/max. 500mA)
Hard drives:
FAT16 and FAT32 (no exFAT or NTFS support)
Card reader:
SD card (secure digital), max. 32GB
Line-level output:
1 pair RCA/phono sockets
Output voltage:
max. 1Vrms
Noise floor
100dB/1V
Digital output:
co-axial (S/PDIF)
D/A-converter: Texas
Instruments
TLV320AIC23B. 24Bit/96kHz, upsampler
Outboard power supply:
9V/2A DC, suitable for your country's mains supply
Power consumption:
1,8A DC max. – with hard drive connected. <1W in standby
Replacement battery remote control: 1 x CR2032 / 3V or 1 x CR2025 / 3V
Dimensions W x H x D (D with sockets): 103 x 36 x 104 (109)mm
Weight:
550g without power supply
Technical specifications Pro-Ject Speaker Box 5
Recommended amplifier power:
10 - 150 watts
Impedance: 8ohms
Sensitivity (1W/1m):
86dB
Dimensions W x H x D / weight:
160 x 255 x 210mm / 4,2kg