Roadi RDT51 - Manual (Page 133)

OWNER S MANUAL
,
OBD2 Car Scanner
129
CHECK
13.3 Accessories Included
1).
User’s Manual -- Instructions on tool operations
2).
CD -- Includes user’s manual, DTC lookup software, and etc.
3).
OBD2 cable -- Provides power to tool and communicates between
tool and vehicle
4).
USB cable -- Used to upgrade the scan tool, and to print retrieved
data.
5).
Carry case -- A nylon case to store the scan tool when not in use.
6).
Cell battery (not provided) --Supplies power to the Scan tool when
disconnected from vehicle DLC. Or you can use the USB cable to connect
to the PC to supply power.
13.4 Navigation Characters
Characters used to help navigate the scan tool are:
1). " " -- Indicates current selection.
2). " "-- A DOWN Arrow indicates additional information is available on
next screens.
3). " "”-- An UP Arrow indicates additional information is available on
previous screens.
4). "$"” -- Identifies the control module number from which data is
retrieved.
5). " G”" -- Indicates graphic viewing is available.
13.5 Keyboard
No solvents such as alcohol are allowed to clean the keypad or display.
Use a mild nonabrasive detergent and a soft cotton cloth. Do not soak the
keypad as the keypad is not waterproof.
13.6 Power
Internal Battery Power
The scan tool has a 9V cell battery that provides power for off-car
reviewing and analysis. Press the power key to turn on the scan tool.
If the scan tool is stored for a long period of time, remove
batteries to prevent battery leakage from damaging battery
compartment.
External Power
External power of the scan tool is provided via the vehicle Data Link
Connector (DLC). Just follow the steps below to turn on the scan tool:
1). Connect the OBD II Cable to scan tool.
2). Find DLC on vehicle.