Roadi RDT51 - Manual (Page 69)

OWNER S MANUAL
,
OBD2 Car Scanner
65
CHECK
If there is no recording in selected location, a message
"Not
Supported or Stored No Data" displays on the screen.
For data stored in temporary cache, you do not have to select memory
location.
3). Use
UP/DOWN button to view recorded PIDs of each frame.
Playback …. -5/16
===========================-6
Playback …. 6/16
=========================-=-4
The number "x/x" to the upper rig ht corner of the screen indicates total
number of recorded frames and sequence of frame being displayed.
Negative frames indicate data recorded prior to trigger event; and
positive frames indicate data recorded after trigger event.
4). Use
LEFT/RIGHT button to view PIDs of next or previous frames.
…………
DTC_CNT 6
FUELSYS1 OL
FUELSYS2 N/A
LOAD_PCT(%)
0.0
ETC( C) -40
SHRTFT1(%) 0.0
…………
DTC_CNT 6
FUELSYS1 OL
FUELSYS2 N/A
LOAD_PCT(%) 0.0
ETC( C) -40
SHRTFT1(%)
0.0
8.4 Viewing Freeze Frame Data
1). To view freeze frame data, use
UP/DOWN scroll button to select View
Freeze Frame from Diagnostic Menu and press
ENTER button.