Roadi RDT51 - Manual (Page 64)

OWNER S MANUAL
,
OBD2 Car Scanner
60
CHECK
Deselect All
==========================2/3
Custom Data Set
=============================
[ ] -Select/deselect
[ ] -Deselect all
[ENTER] -Confirm
[ESC] - Cancel
10). Use
RIGHT button select/deselect data parameters. Selected
parameters are marked with solid squares. Press
ENTER button to
confirm.
Custom Data Set
=============================
You are allowed to pick up a maximum of 18 PIDs. If the selected PIDs
exceed 18, a
"The selected data list is full!" message displays on the
screen.
If you wish to deselect all marked items, press
LEFT button.
A message comes up to ask for your confirmation.
Deselect all
selected PIDs?
YES NO
If you decide to deselect these items, press ENTER; if you decide not
to, press ESC button, or use UP/DOWN button to select NO and press
ENTER to continue PID selections.
DTC_CNT #01
FUELSYS1
FUELSYS2 #02
LOAD_PCT(%) #03
ETC( C )
SHRTFT1(%)