Two Brothers Racing Honda CRF450 - Manual (Page 2)

V.A.L.E.
V A R I A B L E A X I S L O C K I N G E X H A U S T
TM
2007 Honda
CRF450R
Complete Exhaust System with M-7 Canister
Part # 005-1570106V / 005-1570607V / 005-1570608V
Making sure that the V.A.L.E.™ assembly is oriented
correctly, securely tighten upper muffl er mounting bolt.
Securely tighten the two header nuts.
Reinstall side panel with original hardware.
Double check to make sure that all hardware is
tightened
Before you run the bike, clean off all fi ngerprints and
dirt, as any oily residue will etch the metal and become
somewhat permanent when the system gets hot.
Also, remove any plastic fi lm from the name badge(s).
Run the bike and enjoy. It is normal for some white
smoke to appear the fi rst time you start the bike. This is
packing/manufacturing oil from inside the pipe burning
off. Check for gaps or leaks. If you fi nd a leak, a little
high temperature silicon sealant should fi x it. After 50
to 100 miles, recheck all fasteners for tightness.
15.
16.
17.
18.
19.
Installation Instructions