Two Brothers Racing 2009-10 Suzuki GSXR1000 User Manual
Page 4
ITBR001-242
2009-10 Suzuki GSXR1000 - 4
Fi
gu
re
D
Fi
gu
re
E
Fi
gu
re
F
remove bolt
remove bolts
TPS connector
8
Attach the Juice Box Pro connectors to the stock lower injectors and stock wiring
harness as shown in Figure D.
Note:Do not connect the Juice Box Pro harness to the upper injectors. Verify you
are on the set of injectors below the fuel rail.
• orange wire connects to cylinder #1
• yellow wire connects to cylinder #2
• green wire connects to cylinder #3
• blue wire connects to cylinder #4
9
Remove the right hand side fairing.
10 Remove the three bolts securing the regulator/rectifier bracket as shown in Figure E.
Removing the regulator/rectifier bracket allows access to the throttle position sensor
connector.
11 Locate the grey stock throttle position sensor (TPS) connector as shown in Figure F.
12 Unplug the TPS connector.
13 Attach the Juice Box Pro connectors to the TPS connector and wiring harness.