Standard resolution mode (default values): 480p, Input still image, Display: full mode – Sony BKM-FW50 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Make selections based on the aspect
ratios of the images you wish to view.
When viewing still image files, we
recommend making the aspect ratios of
each file the same.
When playing files with mixed aspect
ratios, black bars may appear on
either side of the display, or the image
may be stretched lengthwise.
Still images with aspect ratios other
than 16:9 or 4:3 can also be
displayed, but black bars may appear
at the top, bottom, and either side of
the display, or the image may be
stretched lengthwise.
When the BKM-FW50 is connected
to a display, the RGB mode is set to
DTV mode. In DTV mode, the unit
automatically enters over scan mode,
and any text on the outer edges of an
image will be cut off. For the FWD-
40LX1/32LX1R/50PX2, set the over
scan mode to OFF.
Standard Resolution Mode
(Default Values): 480P
Input still image
©
Display
16
Standard resolution
The input stiil image is converted to
standard resolution, and is enlarged
according to the aspect ratio of the display.
18
Computer Operation
Display: Full mode
16
Display: Full mode
Black bar
The input still image is displayed in
the original aspect ratio.