Sony RM-PP401 - Manual (Page 12)

>
a
<
ft»
3 «
a
SB
(ft
3
0
(0
O
o
(ft
Brief Ascriptions of buttons used for
advencod remote operations
Program indicator: Lights up during programming
operations.
SYSTEM STANDBY: Press this switch together with the
AV l/(!) switch and MASTER VOLUME - button to reset
all the functibn buttons to the factory settings or to clear
the programmed signals.
AV l/C!): Press this switch together with the SYSTEM
STANDBY switch and MASTER VOLUME - button to
reset all the function buttons to the factory settings or to
clear the programmed signals.
- »V
Numeric buttons: Used when changing the factory
settings of the function buttons or specifying the make of
the component that you want to control using the remote.
ENTER D.TUNING: Used when changing the factory
settings of the function buttons or programming the
remote.
Function buttons: Comes with factory settings that you
can change.
IR SET: Press to program the remote.
MASTER VOLUME Press this button together with the
SYSTEM STANDBY and AV l/Ci) switches to reset all the
function buttons to the factory settings or to clear the
programmed signals.
SHIFT >10 -/—: Used when changing the factory settings
of the function buttons.
Changing the Factory
Setting of a Function
Button
You can change the factory settings of the function
buttons (page 5) to suit the components in your system.
For example, if you connect a Sony LD player to the
VIDEO 2 jacks on the receiver, you can set the VIDE02
button on this remote to control the LD player.
Note, however, that the settings of the TUNER, PHONO,
and 5.1 IN buttons cannot be changed.
1 Press down the button corresponding to the
component you want to assign to a function
button (button 6 for the LD player, for example).
Each button and its corresponding components are
shown below.
Button Component
1 CD player
2 DAT deck
3 MD deck
4 Tape deck A
5 Tape deck B
6 LD player
7 VCR (Beta)
8 VCR (8 mm)
9 VCR (VHS)
0 TV
SHIFT >10-/- DBS tuner, satellite tuner, or cable
box
ENTER D.TUNING DVD player
2
While pressing down the button corresponding to
the component, press down the function button
whose setting is to be changed (the VIDE02
button, for example).
The VIDE02 button is now set to control the Sony LD
player.
To reset a button to its factory setting
Repeat the procedure above.
To reset all function buttons to their factory
settings'
First press down MASTER VOLUME then AV 1/(1),
and then SYSTEM STANDBY.
12