Sony RM-PP401 - Manual (Page 6)

Parts Dasciiption
»
3 a
o
*0
[2 EFFECT/DELAY button
Press the button repeatedly to adjust the amount of
effect or delay time*.
• "DELAY" appears on the display window on the receiver only
when the PRO LOGIC sound field is selected; "EFFECT"
appears when a sound field except PRO LOGIC is selected.
Note
The EFFECT/DELAY button does not operate on receivers
that have the CURSOR MODE button.
[8] CURSOR MODE button
Press this button repeatedly to select any of the
following three cursor modes. The indicator for the
selected cursor mode lights up to the left of the display
window on the receiver. The indicator turns off when
you press the SET UP button on the receiver.
When the cursor mode is You can
SURROUND Change the delay time and the
effect level
BASS/TREBLEorEQ Adjust the tone (bass/treble) of
the front speakers. Press the EQ/
TONE ON/OFF button to
activate the tone effect.
INDEX Enter an index name for a preset
station or program source
Note
The CURSOR MODE button does not operate on receivers
that have no cursor buttons.
I EQ/TONE ON/OFF button
Press to turn the tone effect on or off. The TONE
indicator on the receiver lights up while the tone effect
is turned on.
Note that if you have adjusted the tone using the
CURSOR MODE button and cursor buttons, the
adjusted tone will be produced whenever you turn on
the tone effect.
¡TEST TONE button
After selecting the PRO LOGIC sound field, press to
output a test tone.
i LEVEL CENTER +/- buttons
Press to adjust the volume level of the center speaker.
i LEVEL REAR +/- buttons
Press to adjust the volume level of the rear speakers.