Connecting a vcr and tv with a cable box, Connecting to an s video equipped, Vcr with a cable box – Sony KV-27V22 User Manual
Page 7: For optimum picture quality), Note, Ib connecting and installing the tv (continued)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
IB Connecting and Installing the TV (continued)
Connecting a VCR and TV with a
cable box
1
Connect the single (input) jack of the Splitter to
your incoming cable connection, and connect the
other two (output) jacks (using coaxial cable) to
IN on your cable box and VHF/UHF on your
TV.
2
Using a coaxial connector, connect OUT on
your cable box to IN on your VCR.
3
Using AUDIO/VIDEO connectors, connect
AUDIO and VIDEO OUT on your VCR to
AUDIO and VIDEO EM on your TV (YeUow-
VIDEO, White-AUDIO Left, Red-AUDIO
Right).
Connecting to an S Video equipped
VCR with a cable box
(for optimum picture quality)
• KV-27V22, 29V22M only
1 -2
Perform as described above.
3
Using AUDIO connectors, connect AUDIO
OUT on your VCR to AUDIO IN on your TV
(White-AUDIO Left, Red-AUDIO Right).
4
Using an S Video connector, connect S VIDEO
on your VCR to S VIDEO on your TV.
Note:
• To view scrambled channels through your cable box, select
VIDEO 1 by pressing TV /VIDEO on the remote control.
Disconnect all power sources before making any connection
(Rear of TV)
Coaxial cable
AUDIO-R (red)
AUDIO-L(whit
VIDEO (yellow
Splitter
(not supplied)
Cable box
(Rear of TV)
Coaxial cable
t©
YC-15V/30V
(not supplied)
-----------
1
----------
-r
RK-74A (not supplied)
S VIDEO
AUDIO-R (red)
AUDIO-L (white)
Splitter
(not supplied)
Cable box