Sony PVM-2950Q - Manual (Page 10)

Operating a specific monitor with the remote commander
By following procedure, you can operate a specific
monitor with the remote commander without affecting
other monitors that are installed together.
1 Press ID MODE ON on the remote commander.
Monitor index numbers appear in white characters
on all the monitors. (Every monitor has its own
index number from 1 to 255 as factory preset.)
2 Input the index number of the monitor you
want to operate using 0-9 buttons of the
remote commander.
The input number appears right next to each
monitor's own index number.
o © ©
© © ©
© © ® ^
4 After necessary adjustment, press ID MODE OFF.
The monitor returns to the normal mode.
rID MODEn
ON I N D E X N O .
:
1 1 7 . . . s
□
SET
□
T q change the index number
You can change the index number if necessary.
You cannot change the number with the remote
commander. Use the keys on the monitor.
1 Display MENU 4 screen with pressing the MENU
button.
2 Select INDEX NO. and press ENTER.
3 Select the index number with the SELECT + /- buttons
and press ENTER.
3 Press ID MODE SET.
The character on the selected monitor changes to
cyan while others change to red.
ID MODE
ON
□
OFF
□
%
Now you can operate only a specified monitor. (All
operations available in ID mode except POWER
ON/OFF.)
10