Menu 2, 8] h cent, 9] v cent – Sony PVM-2950Q User Manual
Page 9: Qs h size, M v size, In reset2, M degauss, Ie return, Menu 3, Col temp
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Menu 2
E N U 2 L I N E 1
H C E N T
0 0
V C E N T
0 0
H S I Z E
0 0
V S I Z E
0 0
• R E S E T 2
3 E G A U S S
R E T U R N
[8] H CENT
Adjusts the horizontal centering. Press + to move the
picture to the right and press - to move it to the left.
[9]
V CENT
Adjusts the vertical centering. Press + to move the
picture up and press - to move it down.
QS H SIZE
Adjusts the horizontal picture size. Press + to enlarge the
horizontal size and press - to diminish it.
M
V SIZE
Adjusts the vertical picture size. Press + to enlarge the
vertical size and press - to diminish it.
in RESET2
Select to restore the factory settings in MENU 2.
M
DEGAUSS
Select to demagnetize the screen. Wait for 10 minutes or
more before activating this feature again. The same
interval is needed after turning on the monitor.
IE RETURN
Select to return to the MENU 1 screen.
Menu 3
E N U 3 L I N E I
A P E R T U R E
: 3 2
V M
: O N
1 6 : 9
: O F F
P A L
: O F F
C O L T E M P
: 6 5 0 0
16:9
Select ON for a 16:9 picture signal.
PAL
Select ON when the monitor does not recognize the PAL
signal. (You must select ON when the PAL60 signal is
input.)
COL TEMP
Select the color temperature from among 9300K, 6500K
and 3200K.
RESETS
Select to restore the factory settings in MENU 3.
RETURN
Select to return to the MENU 2 screen.
3
IC
VI
3
TILT CORRECT
Adjusts the picture tilt due to the influence of the earth's
magnetism. Press + to rotate the picture clockwise and
press - to rotate it counterclockwise.
INDEX NO.
Sets the index number of the monitor. You cannot set the
number with the remote commander. Use the keys on
the monitor. For more information about the index
number, see "Operating a specific monitor with the
remote commander."
RETURN
Select-to return to the MENU 3 screen.
I
APERTURE
Adjusts the picture sharpness. Press -i- for more
sharpness or press - for less sharpness. (This adjustment
has no effect on the pictures of RGB signals.)
I VM
Select ON to emphasize sharpness and to reproduce a
clear picture. (This adjustment has no effect on the
pictures of RGB signals.)
9