Sony TC-WR550Z - Manual (Page 14)

Advanced Recording Operations
Q' During high-speed dubbing
Only ■ is operative.
Q You don't have to adjust the recording level or
seiect the Doiby NR system during dubbing
Dubbing is automatically performed with the same
recording level and Dolby NR system as the original in
deck A. If, however, you want to monitor the sound
during normal-speed dubbing, set DOLBY NR to match
the tape in deck A {see page 5).
You can adjust the pitch of the piayback on deck A
(TC-WE805S/WE705S/WE505 oniy)
See page 5.
Note
If a TV set IS placed near the tape deck, noise may occur
during high-speed dubbing. In that ca.se, turn the television
set off or move it away from the tape deck.
Dubbing only specific portions
You can do this only during the normal-speed
dubbing.
1 Press ■ on deck A at the portion you want to
skip.
Deck B changes to recording pause.
2 Locate the point you want to resume recording on
deck A, then stop the tape.
3 Press PAUSE II on deck B to resume dubbing.
Recording on Both Decks in
Succession (Relay Recording)
(TC-WA8ESA/WE805S only)
You can make a continuous recording that starts on a
cassette in deck A and ends on a cassette in deck B.
DIRECTION MODE 0/0 REC <
2
3
4
Insert blank cassettes into both decks.
Make sure that record-protect tabs on the
cassettes have not been removed.
Select the Dolby NR system (see page 7).
Set DIRECTION MODE to RELAY.
Press REC # on deck A.
Deck A changes to recording pause.
5 Start playing the program source.
6 Adjust the recording level manually, if necessary
(see page 7).
7 Start recording.
To record from Press
The front side O on deck A
The reverse side O on deck A
To stop Relay Recording
During Press
Recording on ciec'k .A H on deck A
Recording cm deck R H on deck B
Note
Mcike ''Ure th<it Jerk H iippcars in the displnv. If it
d(''CMVt, press on deck H once; otherwise, Kela\’
Recording stops wiu’n t!ie rex ersc side of flio cassetti' in deck
B t i m s h o s .
14