Creating your own program (rms play), To stop rms play, To cancel rms play – Sony TC-WR550Z User Manual

Page 9: You can play the program again after rms play ends, Notes, Checking the order of tracks in the program, If "full" appears in the display, Advanced playback operations

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Creating Your Own Program
(RMS Play)

By creating a program, you can play back tracks on
deck A in any order that you want. The Random
Music Sensor (RMS) function lets you create a program
of up to 28 tracks, from the 1st to the 14th tracks on
each side of the tape.

RMS buttons (RMS/START, SET, CHECK, DISPLAY)

1

Press RMS/START.

"RMS" and a flashing cursor appear in the
display.

2

Press (BACK) or O (FRONT) to select the

side of the tape.
<1 or t> appears in the display.

3

Press or ►► repeatedly until the track

number you want appears in the display.

0

t.

p

FRONT

BACK

1

5 6 7 8 9 10 11 12 13 14

---- Side of the cassette

Track number

4

Press SET to store your selection.

To program the same track again, press SET once
more.

Advanced Playback Operations

To Stop RMS Play

Press ■ (CLEAR) once. The RMS program still remains.

To cancel RMS Play

Press ■ (CLEAR) repeatedly until the peak level meters
appear in the display or eject the tape in deck A. When RMS
Play is canceled, the RMS program is automatically erased.

To alternate between the RMS and peak level meter
displays

Press DISPLAY.

You can play the program again after RMS Play ends

Press RMS/START.

Notes

• During RMS play, you can only use CHECK, DISPLAY, ■

on deck A, and ■,

►► on deck B.

• The RMS function may not work properly if a blank space

between tracks is short.

• If there is a long blank space between tracks, the deck may

fast-forward a portion of the blank space.

• If vour program includes a number for a track that does

not exist, the deck will skip that number during RMS Play.

Checking the order of tracks in the
program

Press CHECK.
Each time you press this button, the display shows the
track numbers in the order they were programmed.
After the last track in the program, "End" appears in
the display.

L_

i

f

i

j

RONT
RM5I;
ACK

1

"

1 2 3 4 5 6 7 8 9 10 1

12 13 14

----Track number

Order on the program

5

Repeat Steps 2 to 4 to program more tracks.

If "FULL" appears in the display

This means that vou've already programmed 28 tracks
and can't program any more.

6

Press RMS/START to start RMS Play.

The peak level meters appear in the display.

Advertising
This manual is related to the following products: