To record date and time, To stop recording date or time, When there is a strong wind – Sony CCD-F301 User Manual

Page 13: 2 press-side of editsearch(gl) momentarily, If the picture has not been recorded, To re-record a previously recorded portion, 3 at the desired point, release editsearch, 4 press start/stop, To pause, To stop

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Recording a Picture Using
Automatic Adjustment

To Record Date and Time

(G-3)

Press DATE for the date indication or TIME lor

the time indication during camera recording or
when in recording pause mode.

The date or time displayed m the viewfinder is

recorded with the picture

To stop recording date or time

Press DATE or TIME again.

The picture recording continues

When There is a Strong Wind

(G-4)

Set BUILT-IN MIC to WIND.
The noise from the wind wiii be reduced.
After recording, set ¡1 to the upper position (green
mark).

To Check the Last Portion of the

Previous Recording

(G-5)

1

Set the camcorder in the recording pause

mode by pressing the START/STOP
button.

2

Press-side of EDITSEARCH(gl)

momentarily.
The last few seconds of the recorded portion
are rewound and then the recorded picture
appears in the viewfinder After a tew
seconds of playback, the camcorder goes
back to recording pause mode

If the picture has not been recorded
The video heads may be contammaled Clean the
heads using the Sony V8-25CI.H video head cleaning
cassette or equivalent

To Re-record a Previously Recorded

Portion

1

Slide STANDBY up to set the camcorder to

the standby mode.

2

Look in the viewfinder and find the point

from where you want to begin the
recording;

Keep pressing the * side ol EDITSEARCH to
advance the picture at a normal playback
speed, or the - side to reverse the picture

3

At the desired point, release EDIT­

SEARCH.

4

Press START/STOP,

A beep sounds and the recording begins

To pause

Press START/STOP again.

To stop

Slide STANDBY down

The picture is connected smoothly after the pre

recorded portion even if STANDBY is slid down
and slid up, or even if the power is turned off and

on again, provided that the tape is not removed

24

•25

Advertising