Sony CCD-F301 - Manual (Page 5)

Identifvina th« Parts
(A-5)
!*1| <9 (earphone) jack (minijack) 9
C REMOTE control connector (stereo
mini-minijack)
Conned a wired remote control unit or a
editing controller, etc here.
Remote sensor 0
Built-In microphone (monaural)
Camera recording/battery lamp 0
Lights up during recording and blinks when
the battery becomes weak.
REC START/STOP button (for
low-position shooting)
0
Use this button for easier low-position
recording.
BUILT-IN MIC (microphone) switch 0
Set to "WIND when recording m a strong
Grip strap 0
Lens cap 0
About <r (LANC)
U stands lor Local Application Control Bus System
The U connector is used lor controlling the tape
transport of video equipment and peripherals connected
to It This connector has the same function as the
connectors indicated as CONTROL L or REMOTE
To remove dust from inside the viewfinder (A-6)
Delach the eyecup as illustrated and dean the surface
oi the screen with a blower
(A-7) Wireless Remote Commander
You can play back a tape from a distance The
buttons on the Commander with the same name
or mark as those on the canicordet have the
same function
When you use the Commander
Be sure to set the REMOTE COMMANDER ON/
OFF switch on the camcorder to ON . and then
start operation ol the camcorder, with the
Commander pointing towards the remote sensor.
(See page lOl
(A-7)
[T] -44 REW (rewind) button 0. 0
[T] II PAUSE button 0,0
[3] DATA SCREEN button 0
r*| FF (fast forward) button 0.0
[5] I PLAY button 0
■ STOP button 0
¡Tj t* SLOW button 0