Close-up (auto-focusing in macro), 2 press macro af, To release this adjustment setting – Sony CCD-F301 User Manual

Page 19: To keep autofocus functioning, Notes, Manual focusing in macro, Ii the lens hood touches the subject, Recommended accessory

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

(N-2)

Powe' zoom button

36

Close-up (Auto-focusing

In Macro)

Even liny subjects such as flowers, insects,

photographs, can literally fill the screen with auto-

focusing in macro

(N-1)

1

Bring the camcorder as close as

necessary to obtain the desired subject
size.
The subject can be as dose as a minimum of

10 mm (13/32 inches) from the lens surface.

2

Press MACRO AF.

|1)The MACRO indication blinks in the

viewfinder and the zoom lever turns
automatically to the MACRO range.

(2) The MACRO indication lights steadily and

indication appears when sharp focus is

achieved automatically.

To release this adjustment setting

Press the T side of the power zoom button or turn

the zoom lever, to return the lever to the ordinary
range.
(N-2)

If the MACRO indication lights steadily before

focusing sharply

The MACRO indication lights steadily if sharp
focus cannof be achieved within 30 seconds. In
this case, press MACRO AF again to re-lunction
aulolocusmg in macro.

If you still do not get a sharp focus, manual

focusing is recommended (page 37). Adjust it
after the MACRO indication lights steadily.

To keep autofocus functioning

Keep MACRO AF pressed.
Contrary to the normal auto-focusing (page 22).
aulofocusing in macro is released each time the
sharp focus IS achieved.

(N-3)

Notes
• This lunchon has no connpction with tlie AUTO

LOCK cover You can use aulolocusmg m macro
while manually adjusting ihe ordinary locus, eic

• Do not press the power zoom button while the zoorr

lever IS moving lo' autolocusmg m macro Otherwisi
autolocusing is released

Manual focusing in macro
1 Turn the zoom lever to the MACRO range without

pressing the button on it

The MACRO indication lights up m the viewfinder

2 Turn the zoom lever wiihrn the MACRO range to

focus sharply

II the lens hood touches the subject
Remove the lens hood Hold the focus nng and turn th
hood by pressing it with your palm. (N-3)

Do Ihe same when attaching removing a filter or

conversion lens (not supplied)

Recommended accessory

When shooting m macro, the depth of field is very

shallow, so pay attention to locusing To keep the
subiect in focus, use a tnpod

37

Advertising