Sony DVP-C650D - Manual (Page 57)

Settings for Sound (AUDIO SETUP)
Select "AUDIO SETUP" after pressing SET UP.
"AUDIO SETUP" allows you to set the sound according
to the playback conditions.
Default settings are underlined.
AUDIO SETUP
AUDIO ATT: OFF
AUDIO FILTER: SHARP
AUDIO DRC: STANDARD
1
TRACK SELECTION: OFF
DOWNMIX: DOLBY SURROUND
\^-
-
DIGITAL OUT: ON
DOLBY DIGITAL: D-PCM
DTS: OFF
To set. press RlilWFl. IhenlENTERl.
To quit, Dress ISETUPI.
■ AUDIO ATT (attenuation)
Selects the setting of fhe outpuf from fhe LINE OUT
(AUDIO 1, 2) and 5.1CH OUTPUT connecfors according
to the audio equipment to be connected.
• OFF: turns off the audio attenuation.
• ON: reduces the audio output level so that no sound
distortion occurs.
Note
The setting does not affect the output from the DIGITAL OUT
OPTICAL and COAXIAL connectors.
■ AUDIO FILTER
Selects the type of digital filter to reduce the noise of a
frequency higher than 22.05kHz (fs 44.1kHz), 24kHz (fs
48kHz) or 48kHz (fs 96kHz).
• SHARP: makes the sound dear and provides smooth
sound reproduction. Normally set this position.
• SLOW: makes the sound warm and deep.
Note
Depending on the disc, the effect on the sound may be difficult to
hear.
■ AUDIO DRC (Dynamic Range Control)
Makes the sound dear with the \'olume turned down at
night, etc., when you plav a DVD. This affects the output
from the DIGITAL OUT connectors onh’ when "PCM" in
"DIGITAL OUT" is set to "ON," and it affects the output
from the LINE OUT (AUDIO 1,2), and 5.ICH OUTPUT
connectors.
• STANDARD: Normally select this position.
• TV MODE: makes the low sound clear even if you
turned the \'oIume down, so it is good for playing at
night. It is esprecially recommended when you listen to
the sound using the speakers of the TV.
• WIDE RANGE: It gives you the feeling of being at a live
performance. When you use high quality speakers, it is
more effective.
Notes
• When you plav DVDs without the AUDIO DRC function, there
maybe no effect on the sound.
• When this item is set to "W'IDE RANGE," the sound c'oiume
frtim other than the 5.1CH OUTPUT connectors may be less
than usual.
• "WIDE RANGE" cannot be selected when you have selected
"NONE" in "SIZE" under "SPEAKER SETUP."
■ TRACK SELECTION
Gives the sound track which contains the highest number
of the channels priority when you play a DVD on which
multiple audio formats are recorded. If multiple audio
charmels are recorded in PCM, DTS or Dolby Digital
format, the higher-numbered channel audio recorded in
PCM, DTS or Dolby Digital format is played.
• OFF : No priority given.
• AUTO : Priority given.
Notes
• When the player stores the settings in memory with the
Playback Memory function, the player may not give priority
even if you select "AUTO."
• When you set this item to "AUTO," the language may change
depending on the "AUDIO" settings in "LANGUAGE SETUP."
The "TRACK SELECTION" setting has higher priority than
that of "AUDIO" settings in "LANGUAGE SETUP" (page 52).
• If you set "DTS" in "AUDIO SETUP" to "OFF," the DTS sound
track is not played even if you set this item tt) "AUTO" and the
highest-numbered channel audio is recorded in DTS format.
• If PCM, DTS and Dolby Digital sound tracks have the same
number of the highest channels, the player selects PCM, DTS
and Dolby Digital sound tracks, in this order.
• Depending on the DVD, the audio with priority mav be
predetermined. In this case, vou cannot give priority to the
DTS or Dolby Digital format by selecting "AUTO."
1/1
a
3
ifi
ui
SI
3
a
>
£.
c'
lA r+
3
n
3
57