Sony DVP-C650D - Manual (Page 59)

Speaker Set Up
■ DTS
Selects output DTS signals via the DIGITAL OUT
OPTICAL and COAXIAL connectors. You cannot select
this item when vou set "DIGITAL OUT" to "OFF."
• OFF: when the player is connected to an audio
component lacking a built-in DTS decoder.
• ON: when the player is connected to an audio
component having a built-in DTS decoder.
Note
Select the setting eorrecth'. Otherwise, tio sound rrr strange
sound \\ ill Ci>me tuii from the speakers, attecting \ (uir ears oi’
causing tile speakers to be damaged.
• Do not play the DTS sound tracks without
connecting the player to an audio component
having a built-in DTS decoder. You cannot hear
the DTS sound unless you connect the player to
an audio component having a built-in DTS
decoder.
• When you play the DTS sound track on a CD, a
loud noise may come out from the LINE OUT
(AUDIO 1, 2), 5.1CH OUTPUT and PHONES
connectors, affecting your ears or causing the
speakers or headphones to be damaged.
• When you play the DTS sound track on a DVD,
no sounds will come out from the LINE OUT
(AUDIO 1, 2), 5.1CH OUTPUT and PHONES
connectors.
Notes on playing the DTS sound tracks on a CD
• Do not play the DTS sound tracks without connecting the
player to an audit) component having a built-in DTS decoder.
The player output the DTS signal via the DIGITAL OUT
OPTICAL and COAXIAL connectors even if "DTS" in "AUDIO
SETUP" is set to "OFF" in the setup display, affecting your ears
or causing the speakers to be damaged.
• The DTS indicator t>n the front panel dttes not light up even if
the player outputs DTS signal \ ia the DIGITAL OUT OPTICAL
and COAXIAL connecttrrs.
• Set the sounds to "STEREO" when you play the DTS sound
tracks on a CD. (See "Changing the Sotinds" on page 3.S.) If
vt)u set the sounds to "1 /L" or "2/R", no st)unds will come out
from the DIGITAL OUT OPTIC.ALand COAXIAL connectors.
Notes on playing the DTS sound tracks on a DVD
• ,Nio sounds will come out from the Ll\F OUT (AUDIO 1, 2)
and PHONES connectors.
• If the player is connected to an audio component lacking a
built-in DTS decoder, do not set "DTS" in "DIC,1TAL OUT" to
"ON" in the setup dlsplav. Otherwise, \\'hen vou plav the DTS
sound track, a loud noise will a)mr‘ out from the speak(.* *rs,
affecting vour ears or causing the speakers to be damaged.
• When vou set "DTS" in "/\UDIO SETUP" to "OFF," no sound
u ill (. (line out from the Dl( ,iT,\l OUT OPTIC. .AI and
C O.AXLAF connectors e\'en itcou plat I PIS sound tracks on
DVDs.
Select "SPEAKER SETUP" after pressing SET UP.
To obtain the best possible surround sound, first spredty
the size of the speakers you have connected and their
distance from your listening position, then set the balance
and lex’el. Use the test tone to adjust the speaker volumes
to the same lev el.
For the speaker hook ups, see pages 12 to 13.
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
TEST TONE: o f f I * “ #
FRONT: LARGE
CENTER: LARGE
....* REAR: LARGE (REAR)
SUBWOOFER: YES
To set. press l••ll♦ ll♦ ll•■ l. thenlENTERl
To Quit, PreSSlSETUPI .
■ SIZE
Selects the size of the speakers to be connected.
• FRONT
— LARGE: Normally select this.
— SMALL: When the sound cracks or the effects of the
surround is difficult to hear, select this. This
activates the Dolby Digital bass redirection circuitry
and outputs the bass frequencies of the speaker from
subwoofers.
• CENTER
— NONE: If you will not cormect a center speaker,
select this.
— LARGE: Normally select this.
— SMALL: When the sound cracks, select this. This
activates the Dolby Digital bass redirection circuitry
and outputs the bass frequencies of the speaker from
some other speakers .
• REAR
— NONE: If you will not connect a rear speaker, select
this.
— LARGE (REARVSIDE*): Normally select this.
— SMALL (REAR^/SIDE*): When the sound cracks or
the effects of the surround is difficult to hear, select
this. This activates the Dolby Digital bass redirection
circuitry and outputs the bass frequencies of the
speaker from some other speakers .
• SUBWOOFER
— NONE: if you do not connect a subwoofer, select
this. This activates the Dolby Digital bass redirection
circuitry and outputs the LEE signals from the front
speakers.
— YES: If you connect a subwoofer, select this to output
the LEE (low frequency effects) channel from the
subwoofer.
VI
ID
3
(Q
IA
Dl
3
Q.
>
Q.
c'
IA
3
3
59