Setting the beep switch – Sony CCD-FX510 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Returning to the normal viewfinder position
Turn the adjustment ring counterclockwise until the word "STBY" that appears in the
viewfinder comes into sharp focus.
When storing the camcorder
Turn the viewfinder barrel to the front.
Setting the BEEP Switch
This camcorder uses a beep sound to help you confirm when you start and stop recording.
When the beep switch is turned on, one beep sounds when a recording is started and two
beeps when the recording is stopped.
Several beeps also sound as a warning of any unusual condition of the camcorder.
No beep sounds when the beep switch is turned off.
Notes
• If the battery has been installed, remove it to set the BEEP switch.
Reattach the battery after setting the BEEP ON/OFF switch.
• Beep will not be recorded on the tape.
• For warning beeps, see page 74.
Getting Started